Alist V2/V3
Alist V2/V3
Driver
First of all, you need to know whether the other party is V2 or V3.
root directory path
- The pathname of the directory to be added, if not filled, it defaults to the root directory, such as:
- https://alist.nn.ci ->
/ - https://alist.nn.ci/a ->
/a - https://alist.nn.ci/a/b ->
/a/b
- https://alist.nn.ci ->
Link
AList link you want to mount
(v3.16.3) If the AList you mounted is "not" enabled Allow Mount, you will not be able to To mount, the following error is prompted
Failed init storage: the site does not allow mounted
failed get objs: storage not init: the site does not allow mounted
(If) or use the username&password provided by the other party to mount, if the other party allows the mount, it must provide username&password or enable Allow Mount, otherwise don’t force it
- v3.16.3 How to mount the lower version than v3.16.3, for the time being, you can only use the
username & passwordprovided by the other party to mount.
Note
Username&Password can be mounted without writing. In this way, guest is used for tourist access. If the other party does not enable the guest account access permission, an error will be prompted when mounting (as follows)
failed get objs: failed to list objs: request failed,code: 400, message: Key: 'LoginReq.Username' Error:Field validation for 'Username' failed on the 'required' tag
- If you started using the
username & passwordmethod to mount, then you switched to using themeta information passwordmethod to mount- You need to manually clear the
tokenthat was automatically filled before, otherwise it will still use theusername&passwordmethod to mount
- You need to manually clear the
Meta password
(The Meta password option is not required, explain to those who need it)
The Meta password refers to the meta information password
The AList path you want to mount has a meta information password set
- example 1:
- The path you mount is
/a - Then you need to know what the other party’s
/apath password is set to see the file, otherwise it will be blank after entering
- The path you mount is
- Example 2:
- The path you mount is
/ - But the root directory
/of the other party has no password set, but other individual folders such as Ali, Baidu, 123 have set passwords, so you can fill in these but only one password.- If the passwords of the three folders mentioned above are set differently, then you can only enter the folder with this password in the one you fill in, and you will not be able to enter without this password. You should understand.
- The path you mount is
Username
AList user name (account) you want to mount
Password
The password corresponding to the AList username you want to mount
Kind tips
It looks very troublesome, but you can understand it after a little operation. The details are written for Xiaobai(The premise is that Allow Mount is enabled on the other party)
The access path is prioritized using [root directory path](#root directory path), if you use
username&passwordmethod for mounting, [root folder path](#root folder path) It is recommended to write/, otherwise your access rights of this user name do not match [root directory path](#root directory path) and an error message will be displayed-Example 1: [root directory path](#root directory path):
file, the access permission folder of the user name is:video, so access will prompt an error-Example 2: [root directory path](#root directory path):
file, the access permission folder of the user name does not havefile, so access will prompt an errorWhen
AList Managementis given to others to mount, you can choose the folder to access when creating a new user. The default/- When the user mounts, [root directory path](#root directory path) is recommended to write
/, so as not to prompt an error because the management has given different access folder permissions
- When the user mounts, [root directory path](#root directory path) is recommended to write
In the most extreme case, it is preferred that you know that the
usernameadded this time can access the folder permissions, whether there is any, and then write the path you want to mount separately to [root directory path ](#root directory path)- If you don't know [root directory path](#root directory path), you can write
/first, go to the mount page to see the path you want to mount separately, and then modify the background settings
- If you don't know [root directory path](#root directory path), you can write
Token
You don’t need to write, it will be automatically filled after filling in Username & Password and saving
password
(The password option is not required, explain to those who need it)
The password refers to the meta information password
The Alist path you want to mount has a meta information password set
- example 1:
- The path you mount is
/a - Then you need to know what the other party’s
/apath password is set to see the file, otherwise it will be blank after entering
- The path you mount is
- Example 2:
- The path you mount is
/ - But the root directory
/of the other party has no password set, but other individual folders such as Ali, Baidu, 123 have set passwords, so you can fill in these but only one password.- If the passwords of the three folders mentioned above are set differently, then you can only enter the folder with this password in the one you fill in, and you will not be able to enter without this password. You should understand.
- The path you mount is
Access Token
(The access token option is not required, explain to those who need it)
(This is for the other party to give you, generally no one will hand over their token to outsiders)
- How to get V2: Go to the V2 document to view --> https://alist-doc.nn.ci/docs/driver/alist#token
- How to get V3: Background --> Settings --> Others -->
Token